[Spridgets] Balking starting when hot.

[dlancer7676 at comcast.net]

This is a 1500--there is no heat shield on the 1500.B 

--David C.
B Life is like a roll of toilet paper. The closer it gets to the end, the
faster it goes.





----- Original Message -----
From: "Jim Johnson" <bmwwxman at gmail.com>
Cc: "Spridgets" <spridgets at autox.team.net>
Sent: Wednesday, September 15, 2010 5:43:57 PM
Subject: Re: [Spridgets] Balking starting when hot.

On Wed, Sep 15, 2010 at 11:42 AM, B <uniquelittlecars at yahoo.com> wrote:
<snip>
> While our LBC's did not have a heat shield.
</snip>

What? B I could be mistaken but I pretty sure there is a metal heat
shield between the carbs and the exhaust manifold on both the 1098 and
1275 engines. B Mine is gone because I am using a Titan intake manifold
and HIF44 single carb but both sets of H2 carbs that I had as spares
had a heat shield on them....
--
Cheers!!
Jim
"The problems that exist in the world today cannot be solved by the
level of thinking that
created them."-Albert Einstein
Suggested annual donation B $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/dlancer7676@comcast.net