[Spridgets] Long term engine storage help..

[WeslakeMonza1330 at aol.com]

After that I'd fabriacate a flat metal plate to bolt over the inlet/exhaust 
 ports and fasten it using a new gasket.  If the head is off it then duct  
tape on the block will provide an air tight seal.
 
Weslake-Monza 1330
 
In a message dated 01/09/2010 03:38:33 GMT Daylight Time,  
spritenut at comcast.net writes:


I  would start it up before you put it away just to get the oil flowing 
to  all the places it needs to be.