[Spridgets] Radiator temp gauge port size?

Lester oldsaabguy at comcast.net
Sun Oct 17 17:48:45 MDT 2010


Well I gave up, I cut the bottom off a heim joint that had the 5/8 -18 on it,
ground two flats and covered it with teflon tape and made a plug.  It's not
pretty but it doesn't leak.

Thanks all,

Lester


On Oct 17, 2010, at 2:48 PM, Chris Manuel wrote:

> It can't be that exotic...the cheapo temp gauge I got at HF bolted in
easily
> on my 1275 without force and does not leak.
>
>
> Chris
>
> -----Original Message-----
> From: spridgets-bounces at autox.team.net
> [mailto:spridgets-bounces at autox.team.net] On Behalf Of Steven Guterman
> Sent: Sunday, October 17, 2010 11:16 AM
> To: Lester
> Cc: Spridget List; bugeye at yahoogroups.com
> Subject: Re: [Spridgets] Radiator temp gauge port size?
>
> Lester,
>
> Have you tried a 3/8" flare fitting that has a 9/16 - 18 thread?
>
> steve
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/oldsaabguy@comcast.net


More information about the Spridgets mailing list