[Spridgets] Fuel sucking vacuum problem on Pinky youtubes to follow.

[WeslakeMonza1330 at aol.com]

That'll work if you happen to have a fuel pressure gauge handy!
 
In a message dated 10/10/2010 12:20:31 GMT Daylight Time,  
an5.sprite at gmail.com writes:

Linda,


You may find it easier to temporarily hook up a  fuel pressure gauge right 
before the first carb.  You can then see if you  are getting a full 3 to 4 
lbs as the engine is cutting off.  If not the  problem is on the tank side.  
If OK check to see if there is fuel in the  float, if that is OK likely 
electrical.

Good Luck

steve