[Spridgets] Fuel sucking vacuum problem on Pinky youtubes to follow.
Steven Guterman
an5.sprite at gmail.com
Sun Oct 10 05:20:31 MDT 2010
Linda,
You may find it easier to temporarily hook up a fuel pressure gauge right
before the first carb. You can then see if you are getting a full 3 to 4
lbs as the engine is cutting off. If not the problem is on the tank side.
If OK check to see if there is fuel in the float, if that is OK likely
electrical.
Good Luck
steve
More information about the Spridgets
mailing list