[Spridgets] Tonneau fit

[uniquelittlecars at yahoo.com]

Rick,
 
Did you try  heating the cover?
 
They shrink when stored & stretch out with the heat.
 
You can try a heat gun or hair dryer.
 
I found the best way for me was to wait for a hot day.
Then set it out on the driveway. Then wait or take a drive.
Let it nice and hot - then it will get a little longer or stretch.
You did not say how short. They all seem to fit tight. Baggie would not look
good.
The tops are the same way - if they were not - they would flap in the wind.
 
Vigil



--- On Wed, 3/31/10, Rick Bastedo <rbastedo at gmail.com> wrote:


From: Rick Bastedo <rbastedo at gmail.com>
Subject: [Spridgets] Tonneau fit
To: "SPRIDGETS" <spridgets at autox.team.net>
Date: Wednesday, March 31, 2010, 9:01 AM


I have a Tonneau cover that is just a bit short to fit my MK2 Sprite.
It seems to have the right fasteners and the bar in the back but is just a
bit short to reach the front tenax fasteners.
Is there someone here in the Seattle area with a Bugeye that would let me
see if it fits their car?

Rick Bastedo
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/uniquelittlecars@yahoo.com