[Spridgets] Poor acceleration, and needing lots of choke, isn't always t...

[David Lieb]

PegasusAutoRacing.Com
http://www.pegasusautoracing.com/productdetails.asp?RecID=5738
David L

On Mar 25, 2010, at 13:59, Lester <oldsaabguy at comcast.net> wrote:

> Where do you find that jig?  Mine is set for drilling through bolt
> heads only..
>
> Lester
>
>
> On Mar 25, 2010, at 1:25 PM, WeslakeMonza1330 at aol.com wrote:
>
>> It shouldn't be necessary but I do have a little drilling jig for
>> drilling
>> the corners of nuts, brass is nice and soft to drill and I do have
>> some
>> spare nuts.
>>
>> In a message dated 25/03/2010 17:57:31 GMT Standard Time,
>> tequila.brad at gmail.com writes:
>>
>> Should  it happen again, I just may do that.
>> Thank you for the  suggestion!
>> _______________________________________________
>>
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/oldsaabguy@comcast.net
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/spridgets/72spridget@gmail.com