[Spridgets] who have you purchased your hard fuel lines from?

[Paul Asgeirsson]

Hi Lin,

Does the new fuel tank already have this installed in it?

You might not need to do anything inside the tank.  Look it over.

Paul A



----- Original Message ----- 
From: "Linda Grunthaner" <grunthaner at gmail.com>
To: "Spridget list" <spridgets at autox.team.net>
Sent: Saturday, January 23, 2010 4:09 PM
Subject: [Spridgets] who have you purchased your hard fuel lines from?


> I am very close to pulling that fuel line out of my tank,  nut loose and
> easily slides on the steel line although pulling the line out of the tank
> seems impossible. I reassembled for the night and getting back to it
> tomorrow. I am afraid I will break it while pulling so I looked up fuel
> lines in Victoria British and they seem to be selling copper fuel lines. I
> did not know copper is now used as fuel line. I thought it reacts with
gas.
>
> Who do you guys and gals use for steel fuel line replacements? How do you
> bend them without pinching the line do you use a plumbers spring coil (I
> sold them in the hardware store for copper plumbing) that is sold for
copper
> what do you use for steel?
> Lin
>
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Suggested annual donation $12.75
>
> You are subscribed as pasgeirsson at worldnet.att.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets