[Spridgets] Cam Timing

[Ron Soave]

--- On Fri, 2/12/10, Frank <spritenut at comcast.net> wrote:
> I had the cam advanced a little and my car ran great
> throughout most of the range.
> However, I had no power pulling hills and a hard time
> hitting 90 mph.

Frank,

Makes sense. Advancing the cam shifts the torque curve downward - should be more low end torque, less top end. 4 degrees sounds like a lot, +/- 2 degrees is all the variability recommended for the one I have in White Trash. Also check if Kent recommends any change in valve clearances for the cam if advanced.

Ron