[Spridgets] Accelerator cable collar

[corvallis at peoplepc.com]

Ends for braided cable are usually crimped on and/or soldered on. Brazing
might work. IMHO welding would cause the cables to become brittle, and
they'd brake later.

If you want to pull the whole thing out, you can have it duplicated. 
 ...bill in corvallis
==================================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of cmanuel at wi.rr.com
Sent: Friday, December 31, 2010 10:19 AM
To: spridgets at autox.team.net
Subject: [Spridgets] Accelerator cable collar

Hi all-
its almost 50 degrees here (for a few hours at least) in SE WI so of course
I need to do some laps in the neighborhood.  I notice my gas pedal feels odd
so I check the cable from one end to the other and find that the metal
collar on the firewall/pedal-box area inside the engine compartment has
broke free.

is there a repair kit for this or do I have to weld it up somehow?

thanks
Chris
66 MKII
_______________________________________________