[Spridgets] Ribcase on a 948

Bill Masquelier billmasq at hotmail.com
Wed Aug 11 19:10:39 MDT 2010


Yes- the trans will bolt right up.You may check that the yoke is straight
enough to activate the pressure plate properly and that the throwout bearing
works correctly too but it should all fit fine.BillM

> From: nases at verizon.net
> Date: Wed, 11 Aug 2010 19:58:41 -0400
> To: spridgets at autox.team.net
> Subject: [Spridgets] Ribcase on a 948
>
> Is the ribcase trans a direct bolt on to the 948 engine?
> Thanks.
>
> Any listers attending AHSTC Encounter this week at Normandy Farms in Blue
> Bell, PA?  I haven't heard if the Philly region hosting the event is
inviting
> other clubs to the Saturday show like LV Region did last year.
>
> Phil Nase
> Quakertown, PA
> http://home.comcast.net/~philnasecpa/
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/billmasq@hotmail.com


More information about the Spridgets mailing list