[Spridgets] 7/16 wheel studs

[derf]

You can press them in or use extra lug nuts with a washer to seat them.
Sometimes if you use the nut/washer you don't have to pull the
axles/hubs.  But, you can probably pull the axles/hubs in less time
than it took me to type this.

On Wed, Sep 30, 2009 at 9:45 PM, Frank <spritenut at comcast.net> wrote:
> Has anybody converted to 7/16 studs?
> I acquired a set of aluminum slots for my daughter's Bugeye but the lug
nuts
> are for 7/16 studs.
> What is involved in this conversion? I found the wheel studs at the local
> auto parts store but do I need splines pressed in where the old ones were?
> I can re-drill the holes but what about the splines?
>
> --
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as derf247 at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets