[Spridgets] Engine Rebuild Time

[David Ambrose]

It's engine rebuild time for our 1970 Midget. Looks like we've lost a 
con-rod bearing. <sigh> I've rebuilt B-Series engines, but this will be 
the first time I've rebuilt a 1275. The engine was tired anyway, so this 
isn't completely unexpected.

I saved off the engine extraction thread, so I think I'm set there.

Can anyone recommend a machine shop in the San Diego (CA) area?

Assuming we need to replace the cam and lifters, any camshaft 
suggestions?  I've used "fast road" cams to good effect on the B 
engines. Is a slightly hotter than stock cam a good choice for a 1275? 
We have fresh SU carbs on the engine with a stock manifold and a stock 
exhaust system. We're also running a pertronix distributor.

Any other mods worth doing while we're here?  I see that Moss offers an 
actual rear seal kit. Is that a worthwhile addition? Are there better 
sources?

Any preferred brands of pistons? What about bearings?

Thanks in advance, I'm sure I'll have more questions as we go along.

Best Regards,
Dave Ambrose