[Spridgets] still no workie...

[Edward Perez]

vacuum comes off of the base of the Weber...
To: Richard Ball <richb at u.washington.edu>
Cc: spridgets at autox.team.net
Sent: Wed, October 14, 2009 3:07:54 PM
Subject: Re: [Spridgets] still no workie...

Richard Ball wrote:
> 
> Here are the symptoms again.  The engine starts right up and idles fine.
> When you open the throttle the engine RPM increases as it should until about
> 2200 RPM.  At this point any further opening of the throttle causes the
> engine flatten out, bog down, stumble, 

Are you pulling a vacuum off the intake for the vac advance?
Not a good idea.
Not being familiar with the guts of this dizzy, but is the advance plate secure or is it floating around.
I just found this problem out on some one else's Sprite he loaned me. Talk about variable timing!

-- Frank Clarici
Toms River, NJ
My own Fleet of Sprites
You are subscribed as eap2140 at yahoo.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets