[Spridgets] Cancel Turn Signal
Michael Rowe
mdrowe at optonline.net
Wed Oct 7 11:00:39 MDT 2009
Cancel! It turns out there are two sets of barbs in the hazard switch. One is a box that holds the whole thing in the consul; the other holds the switch mechanism in the box. There is access to the barbs on the latter.
So I cleaned up the switch and squirted some WD40 and the turn signals work fine. Except the hazard circuit didn't work. Turns out that the in-line fuse was on the floor, but the holder was closed. What really, especially, super-dumb mechanic would close an empty fuse holder?
Super-Dumbie
'74 Midget
'60 Sprite kit
Long Island, NY
More information about the Spridgets
mailing list