[Spridgets] Venting... a 1275 w/ Weber

[Larry Daniels]

Then you should take another look at Ron Soave's post about a PCV valve 
because there is nothing "positive" about your method.

LAD

--------------------------------------------------
From: <WeslakeMonza1330 at aol.com>
Sent: Friday, November 13, 2009 4:01 PM
To: <72spridget at gmail.com>; <spridgets at autox.team.net>
Subject: Re: [Spridgets] Venting... a 1275 w/ Weber

My car IS a road car and not a race car.  In fact it wouldn't pass
scrutineering and I should know because I'm a scrutineer.

Weslake-Monza 1330

In a message dated 13/11/2009 12:59:14 GMT Standard Time,
72spridget at gmail.com writes:

>  >From the rocker/valve cover to the catch tank.  From the timing  cover
to
> the catch tank.  From the (late) block to the  catch tank.

Ah, but the original premise was "Not a racecar".
PCV  makes a better solution on the road.
David  L
_______________________________________________
You are subscribed as ladaniels at sbcglobal.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets