[Spridgets] Dead screws

brian S bugeye15 at hotmail.com
Thu May 28 12:01:37 MDT 2009


Didn't see this mail before I sent the last one.
Glad you got em out.
I wound up putting 1/4-28 bolts in mine.
I may have some of those pointy screws laying around,
probably not 8 tho.

Brian S.
Bugeyeracer finally resto'ed!



> Date: Wed, 27 May 2009 16:04:27 -0400
> From: mdrowe at optonline.net
> To: spridgets at autox.team.net
> Subject: Re: [Spridgets] Dead screws
>
> Well, it was nowhere near as bad as I feared, and I got myself all worked up
> over nothing.
>
> I drilled the heads off the dead screws giving access to the shafts.  One
> came out immediately with a vicegrip, the other needed some heat and PB
> Blaster.  The backing plates for the hinges are threaded with no captive
> nuts.  They are *very* thin, so it does not take much to break the screws
> loose.
>
> The hardware stores do not carry 1/4x28 Philliips screws with pointy ends.
>
> Michael Rowe
>

_________________________________________________________________
Insert movie times and more without leaving Hotmail..
http://windowslive.com/Tutorial/Hotmail/QuickAdd?ocid=TXT_TAGLM_WL_HM_Tutoria
l_QuickAdd1_052009


More information about the Spridgets mailing list