[Spridgets] 1275 pressure plate question

Marc smarc at smarc.net
Tue May 19 13:23:41 MDT 2009


Well, that's not it then - the parts are in spec...  Thanks for the info...



Peter Caldwell wrote:
> At 01:54 PM 5/19/2009, Marc wrote:
>> Could it be something as simple as the wrong TO bearing? By the looks 
>> of this 
>> http://www.aptfast.com/APT_Parts/Aseries_Parts/a_Clutch_Flywheel.htm 
>> there are two different TO bearings, with the later version appearing 
>> to be somewhat thinner. Hard to tell exactly from the pictures.
>>
>> I have two different clutch kits, both correct, however the TO 
>> bearing from each of them resembles the part show for the 948.
>>
>> Anyone know definitively?
> ======================================
>
> Measuring from the center of the pivot pegs to the face of the carbon:
>
> 948cc    1/2"
> 1098      3/4"
> 1275   .970"
>
> Peter C. _______________________________________________


More information about the Spridgets mailing list