[Spridgets] Headlight dipper switch - help!

[Brad Fornal]

If you look closely at the cap, I believe you will see a dimple in the side
of it. Try to use a 16 penny nail, and make that dimple a wee bit deeper,
then push it back on.

Brad

On Sat, May 16, 2009 at 2:12 PM, <CAWS52803 at aol.com> wrote:

> Recently the little (1") cap/button popped off it's bracket.  This is the
> dimmer switch that controls the high/low headlights on my Bugeye.  I
> cleaned
> it up and pushed it back on, but because of the spring, it just pops back
> off.  There is no apparent way to fastened it down.  Even the Parts Manual
> doesn't show any method to secure the cap.  And looking at the bracket,
> there
> is nothing that appears to be a switch to control the headlights.  It is
> just
> a solid piece with the 3 wires connected to the underneath.
> Any guidance and/or explanation is greatly appreciated.
> Rudy Streng
> Lenoir, NC
> **************Recession-proof vacation ideas.  Find free things to do in
> the U.S.
> (
> http://travel.aol.com/travel-ideas/domestic/national-tourism-week?ncid=emlcntustrav00000002
> )
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as tequila.brad at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>



-- 
DON JULIO 1942

www.myspace.com/tequilabrad