[Spridgets] Top Bow Measurement

[rrengineer @dslextreme.com]

O.K., that sounds about right then.  I get 12 1/2 inch when I measure mine.
That means my top was cut wrong.  Thanks.
Mike

On Fri, May 15, 2009 at 12:59 PM, Herbert Miller <hgmiller3 at qwest.net>wrote:

> Mike;
> On the center line of the car 12 1/8 inch.
>
> Herb Miller
>
> -----Original Message-----
> From: spridgets-bounces at autox.team.net
> [mailto:spridgets-bounces at autox.team.net] On Behalf Of rrengineer
> @dslextreme.com
> Sent: Friday, May 15, 2009 2:10 PM
> To: Spridget
> Subject: [Spridgets] Top Bow Measurement
>
> You guys with Bugeyes, can you take a measurement for me?  Measure the
> distance from the front to the rear top bow with the bows extended.  I have
> a top that I bought from Little British Car Company a while ago and the
> "pocket corners" sewn into the top for the front bow is not in the right
> place or I have something going on with my top bows.  Supposedly this top
> was made in England (not China), so it should be right.
> Mike MacLean
> 60 Sprite
> 56 BN2
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as hgmiller3 at qwest.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets