[Spridgets] If I had a welder, I'd welder in the mornin', I'd welder in the evenin'...

mike rambour mikey at b2systems.com
Mon May 11 16:55:56 MDT 2009


 Yes, you do need to learn to weld or get better friends who have
already learned :)

	mike

On Sun, 2009-05-10 at 20:40 -0700, David Booker wrote:
> Crap!  I was getting ready to put my new "Chassis Saver" paint on the engine
> compartment and remembered that I hadn't removed the last two mounting screws
> I had to cut off from my original heater box.  No big deal.  Out comes the
> chisel and hammer to tap them with and a small pair of vice-grips to twist
> them out. 
>  
> A few miutes later, they were both out, but I was now painfully aware of just
> how little metal was actually left of the tray there.  If I had remained
> unaware, I coulda painted it and put the new stuff back and gone blissfully on
> my way till the battery hit me in the foot some day.  But nooooo.  Now that I
> know, I'm reminded once again that I really need to get a welder and take some
> lessons. 
>  
> Instead, I'll probably try to get it to my neighbor's body shop some night
> after work and cut it all out, form up a new one on his brake and watch him
> weld it in.  Man, I need to learn this welding stuff!
>  
>  - David
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as mikey at b2systems.com
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list