[Spridgets] Undercoating

[Neil Anderson]

You might try some spary on chip-guard clear paint like they put on rocker 
and quarter panels.


----- Original Message ----- 
From: "Michael Rowe" <mdrowe at optonline.net>
To: "Spridget Chat Group" <spridgets at autox.team.net>
Sent: Thursday, May 07, 2009 9:55 AM
Subject: [Spridgets] Undercoating


> We get a lot of salt spray on our lawn that rots out the mower deck, so I 
> sprayed rubber undercoating left over from the car on the inside of my new 
> mower to reduce corrosion.  The first mowing scrubbed it all off.  So I 
> sprayed WD40 yesterday.  It scrubbed off in minutes.  I would not guess 
> that flying grass is especially abrasive, but it is like media blasting. 
> Any recommendations beyond hosing it off every time?
>
> Michael Rowe
> '74 Midget
> '60 Bugeye kit
> Long Island, NY
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as nlaredbt7 at tbc.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets