[Spridgets] Clutch Issue

[Kirk Hargreaves]

My gear box likes to tighten up after I am out on the road.  I need to bleed
the slave. . but last night I needed to make a run and didn't have much
time. .

I took my grinder and ground off part of the back of the stop stub behind
the clutch pedal.  I had already attempted (earlier on) to adjust the
clutch.   So with the stop piece ground down about 1/4 inch, or less, the
car ran just fine!   I was finally able to open the clutch enough to get
around without any issues.

Of course this is no doubt a short cut asking for future trouble. .  so I
will be getting under the car and dealing with things as should be dealt
with.

Kirk
59
BE