[Spridgets] Hub Nut

[Frank]

Paul Asgeirsson wrote:
> Hi John,
>
> I use a 1 7/8" wrench on the lock nut.  Fits perfectly.  Make sure you have
> the locking washer tab pounded back out of the way so the wrench will fit
> over the nut.  Nuts sorta thin!
>
> They are "handed" nuts on some cars so watch that.  It isn't always a case
> of twist left for taking it off!
>
>   
Paul!
Welcome back.

Like Paul said, 1-7/8" socket fits but in a pinch a hammer and dull 
chisel will loosen the nuts.
1 is a left hand thread.