[Spridgets] Slave Cyl
Kirk Hargreaves
khargreaves2 at gmail.com
Fri Jun 26 13:43:03 MDT 2009
Mark,
Regarding the slave cyl. The top bolt has always been difficult to reach.
>From others who mentioned doing the same. . I took the top bolt (after
getting if off) and cut the head of the bolt off. I then screwed it back in
with Loctite so that it is now a stud.
This way, when I have to pull the slave cyl. . . I only have to deal with
the bottom bolt which is accessible. . just slip the cyl over the top bolt
and tighten the bottom.
I have been using mine like this for a few thousand miles with no problems.
Just a thought regarding. . .
Kirk
59 Frog Aye
More information about the Spridgets
mailing list