[Spridgets] Vacuum guage...

[Frank]

Dave G. wrote:
> I'd like to plumb a vacuum guage into the factory standard intake 
> manifold...
> There are several blind bolts on it.
> I'd like to put the guage where it see's the vacuum from all 
> cylinders...
>   
Later intakes were tapped for a vacuum nipple, they just drilled out the 
front heater pipe securing spot and tapped it 1/4 x 20.
Probably a standard size threaded nipple at any hardware store.

-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites