[Spridgets] Crankshaf tpulley bolt

[Ron Soave]

Be careful with the impact wrench. Even in"undo" mode there is a hammering effect that is undesirable on a crankshaft (big problem on early Miatas).

David Lieb wrote: 
>> I did mine in Frank's driveway a month ago.
>> As larry said, if you take the pan off,
>> put a 2x4  between the block and crank.
>> Or as I did, use a breaker bar, put it against
>> the frame, and bump the starter to break it loose.
> Or the old soft rope in one of the combustion chambers trick. If you
> use an impact wrench, you frequently don't need anything to hold the
> crank.
> David L
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> You are subscribed as soavero at yahoo.com
> http://www.team.net/archive
> http://autox.team.net/mailman/listinfo/spridgets