[Spridgets] Pulling the engine

[bighealey at charter.net]

A note on radiators for the 1500 little cars

The aftermarket ones are hard to get (no clearance).

Better to rebuild an original.

---- David Lieb <72spridget at gmail.com> wrote: 
> Drew,
> If you need to pull both of them, by all means yank them together. It
> is a pain to get just the trans out. The place we all disagree is
> whether you should leave the trans in place when all you really want
> out is the engine.
> 
> I do happen to have a radiator here for a 1500, I just doubt that it
> is any good. If you want it as a spare/core, it is all yours.
> David L
> 
> 
> 
> On Wed, Jul 15, 2009 at 12:55 PM, Andrew Payne<andrewpayne at intrex.net> wrote:
> > Ok, this has been addressed many times, but also for many reasons.  I am
> > pulling the engine and transmission this weekend to get ready to roll the
> > car on its side for new floors and sills.   I have already pulled the hood
> > and the radiator (anyone got a spare radiator for a 76?)  and wanted to
> > confirm that I should pull engine first then gearbox, rather than as one
> > unit.  I ask again because there always seems to be a caveat in the other
> > answers, where as I am stripping the car.
> >
> >
> >
> > Thanks,
> >
> > Drew
> > _______________________________________________
> > Support Team.Net  http://www.team.net/donate.html
> >
> > You are subscribed as 72spridget at gmail.com
> >
> > http://www.team.net/archive
> >
> > http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as bighealey at charter.net
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets