[Spridgets] Heads

[brian S]

Ron,

What's a Bauchman head go for?
I imagine it's not cheap...


Brian S.
Bugeyeracer under resto



> Date: Wed, 21 Jan 2009 16:45:57 -0800
> From: soavero at yahoo.com

>
> I have a Longman head. It's got 11 holes in it, use the ones that match your
block. There isn't any more to it. If you have a 9 stud block, the other two
holes are useful indicators if your head gasket has blown ;-0.
>
> I have a relatively cheap Longman head, it's ok. A friend of mine has a
similarly spec'd engine with a Bauchman head and he's getting 150+ HP and 112
ft-lb of torque (a good 25 hp more than I).
>
>
> --- On Wed, 1/21/09, Michael Rowe <mdrowe at optonline.net> wrote:
>
> > From: Michael Rowe <mdrowe at optonline.net>
> > Subject: [Spridgets] Heads
> > To: "Spridget Chat Group" <spridgets at autox.team.net>
> > Date: Wednesday, January 21, 2009, 3:35 PM
> > MiniMania offers Longman heads for 11-stud blocks that
> > "will fit 9-stud blocks."  I assume they are A+
> > heads, but I can't find any information on this
> > difference.  Also, alloy heads claim a different internal
> > shaping that increases flow by 30% with standard valves.
> > All are expensive.  Any advice?
> >
> > Michael Rowe
> > '74 Midget
> > Long Island, NY
>

_________________________________________________________________
Hotmail. goes where you go. On a PC, on the Web, on your phone.
http://www.windowslive-hotmail.com/learnmore/versatility.aspx#mobile?ocid=TXT
_TAGHM_WL_HM_versatility_121208