[Spridgets] Heads

[Ron Soave]

I have a Longman head. It's got 11 holes in it, use the ones that match your block. There isn't any more to it. If you have a 9 stud block, the other two holes are useful indicators if your head gasket has blown ;-0.

I have a relatively cheap Longman head, it's ok. A friend of mine has a similarly spec'd engine with a Bauchman head and he's getting 150+ HP and 112 ft-lb of torque (a good 25 hp more than I). 


--- On Wed, 1/21/09, Michael Rowe <mdrowe at optonline.net> wrote:

> From: Michael Rowe <mdrowe at optonline.net>
> Subject: [Spridgets] Heads
> To: "Spridget Chat Group" <spridgets at autox.team.net>
> Date: Wednesday, January 21, 2009, 3:35 PM
> MiniMania offers Longman heads for 11-stud blocks that
> "will fit 9-stud blocks."  I assume they are A+
> heads, but I can't find any information on this
> difference.  Also, alloy heads claim a different internal
> shaping that increases flow by 30% with standard valves. 
> All are expensive.  Any advice?
> 
> Michael Rowe
> '74 Midget
> Long Island, NY
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as soavero at yahoo.com
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets