[Spridgets] Brake conversion problem

Jay Fishbein jfishbein at snet.net
Sun Dec 6 09:35:42 MST 2009


I have one Rebuilt 3/4" Master Cylinder new in the box from the project that
Gerard put together a couple of years ago.

If anyone is interested, contact me off-list.

jay fishbein
wallingford, ct


--- On Sun, 12/6/09, corvallis at peoplepc.com <corvallis at peoplepc.com> wrote:

From: corvallis at peoplepc.com <corvallis at peoplepc.com>
Subject: Re: [Spridgets] Brake conversion problem
To: spridgets at autox.team.net
Date: Sunday, December 6, 2009, 7:45 AM

Disk brake bleeders are supposed to be on top; air rises. ...bill in oregon
======================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of Joe Lansing
Sent: Sunday, December 06, 2009 3:34 AM
To: Spridgets
Subject: [Spridgets] Brake conversion problem

I have converted my 62 sprite to disk brakes up front. I also had a 3/4 bore
master cyl. rebored/rebuilt and I put it in. I cannot get the system to
bleed all the air off entirely. I get firm pedal after 3-4 strokes, but it
won't hold. I have done each wheel cyl. 3-4 times.

Is there a trick to doing the disk brakes? I thought I read somewhere that
they were difficult. Did I install them wrong? The bleeders are at
bottom...any ideas, help, resources?

Joe - of the 3 Year Upgrade Project.
_______________________________________________
You are subscribed as jfishbein at snet.net

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list