[Spridgets] Seat Cushions

[bv]

Allen,

I bought a set of seat cushions for my bugeye from Moss several years ago.
They were made from cut grey foam, and glued into the right shape. The cut
foam was a little firmer than the old sponge rubber.
I later bought  a set from AH spares in England. They were much closer to the
original and made from molded foam rubber. They were also a little more cushy,
more like the originals.

I replaced the 'cut' foam ones from moss with the ones from AH spares, mostly
because it lowered my driving position by over 1-inch, and I wanted to sit as
low as possible in the car.

Regards,
Bryan Vandiver
59 - sprite

--- On Tue, 8/25/09, kramer.allen at comcast.net <kramer.allen at comcast.net>
wrote:

From: kramer.allen at comcast.net <kramer.allen at comcast.net>
Subject: [Spridgets] Seat Cushions
To: "spridgets" <spridgets at autox.team.net>
Date: Tuesday, August 25, 2009, 9:51 AM

It looks like it is time to replace the seat cushions in my bugeye. What are
my options other than the Moss replacements? Any comments regarding the Moss
replacements?

Thanks,

Allen

1960 Bugeye
You are subscribed as bvsprite at yahoo.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets