[Spridgets] Bugeye Horn

[Frank]

Jim F. wrote:
>   I was able to obtain a Steering column surround from Atlanta Auto Imports ,
> without the slip ring.  i assume that this is the copper ring that the horn
> needs. Does anyone source this item for a BE?
>
>   
It is brass and you could probably make one if you have a small piece of 
brass or copper will work just as well.
You can see the outline on the plinth, and 3 spots for the bend over 
tabs. A wire with a bullet connector was soldered to it.
I do not have one handy and am trying to remember mine when I took the 
brass ring off a cracked plinth and put it on a good plinth.
You can get copper or brass at any craft, hobby, or quality hardware 
store in small squares.


-- 
Frank Clarici
Toms River, NJ
My own Fleet of Sprites