[Spridgets] Undercoating
ldsp
60bugeye at cebridge.net
Sun Aug 2 19:27:51 MDT 2009
Concours standards list all th places to be undrcoated. I will look them up
later tonight and send the info. Right now I am off to paint on a job I am
doing (office doors in a buisness) so I cant do it until around 3 am.
Leo
----- Original Message -----
From: "Linda Grunthaner" <grunthaner at gmail.com>
To: "Dean Hedin" <dlh2001 at comcast.net>
Cc: "spridgets list" <spridgets at autox.team.net>
Sent: Sunday, August 02, 2009 10:05 AM
Subject: Re: [Spridgets] Undercoating
> Dean,You said "Bugeyes did have original undercoating is certain areas"
> are
> those the areas Frank undercoats, which are just under the boot & under
> the
> bonnet blinker area?
> Lin
> PS Where is this type of documentation listed?
>
> On Sun, Jun 21, 2009 at 11:18 PM, Dean Hedin <dlh2001 at comcast.net> wrote:
>
>> Undercoating is one of those double edged swords.
>>
>> One one hand it was kind of a good thing that some previous owner
>> undercoated
>> the vehicle back in during the earlier life of the vehicle. It may be
>> one
>> of the reasons that you have
>> something decent to restore today because it prevented a lot of
>> corrosion.
>>
>> On the other hand it's a bear to remove.
>>
>> It's kind of like fine art restoration in the respect that long ago there
>> were preservation
>> methods employed that would be frowned upon given the state of the art
>> today.
>>
>> One should also be aware that Bugeyes did have original undercoating is
>> certain areas.
>> Are you sure you want to remove it all?
>>
>>
>> I've had good results removing old undercoat with one of these:
>> http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=65700
>>
>> The vibrating scraper shaves off the undercoat really well. You will
>> have
>> to pause time to time to clean the blade. I would also sharpen the blade
>> every so often.
>>
>> BTW, This tool has been very handy for a bunch of other restoration
>> tasks.
>>
>> As a sander, I have used it to remove blemishes from the cockpit surround
>> aluminum
>> before I buffed them out.
>>
>> I also used it to sand in the tight spots under the bonnet before
>> painting.
>>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> You are subscribed as grunthaner at gmail.com
>>
>> http://www.team.net/archive
>>
>> http://autox.team.net/mailman/listinfo/spridgets
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as 60bugeye at cebridge.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
More information about the Spridgets
mailing list