[Spridgets] Radiator dent removal

[rrengineer @dslextreme.com]

Get a radiator shop to take it apart and then you can beat it out.  Might as
well rod it out at the same time.  Looks to be too sharp a dent to "pull"
out.  probably cost the same as the dent puller kit anyway.
Mike MacLean
60 Sprite
56 BN2

On Sun, Apr 12, 2009 at 8:59 PM, Dean Hedin <dlh2001 at comcast.net> wrote:

> Here is a picture of the radiator dent I need to repair.
>
> http://i295.photobucket.com/albums/mm135/brokencase_photos/radiator%20dent/fixdent.jpg
>
> ----- Original Message ----- From: "Dean Hedin" <dlh2001 at comcast.net>
>
>  I have a slight dent in the top "tank" portion of my Bugeye radiator.
>> It is not very severe.   Ill see if I can post a pic.
>>
>> In any case,what is the best approach to removing this dent?
>>
>> I remember seeing a gizmo somewhere that pulls dents with a little pad
>> that you hot melt
>> to the center of the dent and then had a jig that suctioned cupped to the
>> surface.  You
>> then screwed the dent out.  I thought that might work well.  Has anyone
>> used one of these?
>>
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as rrengineer at dslextreme.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets