[Spridgets] oil dipstick

[Chris Manuel]

On my 66 1098, the tube is about 1.25 inches, and the max point measurement
is about 7.75 inches.

Chris 
-----Original Message-----
From: spridgets-bounces+cmanuel=wi.rr.com at autox.team.net
[mailto:spridgets-bounces+cmanuel=wi.rr.com at autox.team.net] On Behalf Of
Matt Hagopian
Sent: Saturday, September 13, 2008 4:53 PM
To: Billy Zoom
Cc: spridgets Spridgets at autox.team. Net
Subject: Re: [Spridgets] oil dipstick

Could someone please take a measuement from the block to the top of the
dipstick tube and from the point that the dipstick touches the tube to the
max point. Thank you! ps. I ordered a dipstick tube but it wont be here
until after my race, thats why i am asking for these 2 measurements

On Sat, Sep 13, 2008 at 2:15 AM, Billy Zoom <billyzoom at billyzoom.com> wrote:

> I think you're supposed to change the plastic tube when you change the
> filter. Some of the Mini places sell metal ones.
>
>
>


-- 
Sincerely,


Matt Hagopian
You are subscribed as cmanuel at wi.rr.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets