[Spridgets] FW: Weepy fittings at MC

[Dean Hedin]

Right, the problem is not the silicone fluid.

One possibility is that Phil has the wrong type (or poor quality) flairs on his new brake line.

Phil do the ends of your brake line look like this?

http://www.projet-tr4.org/photos/small/brake3.jpg

A corroded fitting will also cause trouble.


----- Original Message ----- 
From: "Frank Clarici" <spritenut at comcast.net>
To: "Larry & Sandi Miller" <millerls at ado13.com>
Cc: <spridgets at autox.team.net>
Sent: Sunday, October 12, 2008 7:18 PM
Subject: Re: [Spridgets] FW: Weepy fittings at MC


> Larry & Sandi Miller wrote:
>>> Don't use silicone brake fluid!   .bill in Oregon
>>
>> BS, I've used silicone in sprites as long as I can remember. I have 
>> never had any problems with it.
>>
> I agree, I have been using silicone for over 10 years, never a problem 
> except for the slave on the A40 and the slave on my 5 speed Sprite both 
> of which were 10 years old when they needed replacement.
> This sure beats 3-5 years with LMA.
> 
> 
> -- 
> Frank Clarici
> Toms River, NJ
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as dlh2001 at comcast.net
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/spridgets