[Spridgets] Greasing the front suspenion,

[Chris King]

That's what I did to add the second zerk to my a-arms. Use some grease
on the drill and tap to minimize any shavings from getting inside the
fulcrum.

-=Chris

Chris King
http://home.comcast.net/~kvcbk/

<-----Original Message-----> 
>From: Greg Higgins [g.h.higgins at gmail.com]
>Sent: 10/6/2008 10:29:46 PM
>To: spridgets at autox.team.net
>Subject: Re: [Spridgets] Greasing the front suspenion,
>
>Lester;
>
>I ended up drilling and tapping the round blanking disc on each A arm,
then
>screwed in the grease fittings. It took 10 minutes per side, and it's
an easy
>job.
>
>Greg Higgins
>63 sprite
>_______________________________________________
>Support Team.Net http://www.team.net/donate.html
>
>You are subscribed as cbking at alum.rpi.edu
>
>http://www.team.net/archive
>
>http://autox.team.net/mailman/listinfo/spridgets
>.