[Spridgets] steering wheel horn push

Maxime Slegers max at maxengland.com
Thu May 29 09:40:29 MDT 2008


Good nut and bolt restoration!

Max

>>I bought a small MIG welder and yesterday got the gas tank and a pile of
>>scrap metal from the recycling dump to  practice on.
>
> Mike,
> This is obvious, but you have to see what you are welding to do a
> good job. This means if you are having trouble producing good welds
> it may be that you can't see the weld pool very well. Welding helmets
> can accept "cheater" lens just like the reading glasses you can buy
> from the drug store. Depending on your eyes, you may find them
> helpful. They come in a variety of strengths - just like the reading
> glasses. I find I do better without wearing my regular glasses. The
> bifocals always seem to be in the wrong location. I do use a +2
> cheater lens. If you try and weld in strong sun light that can be a
> problem as to much stray light gets behind your helmet. Seeing what
> you are doing is a big part of producing good welds.
>
> Tim
>
>
>
> Tim Collins
> http://www.flickr.com/photos/12702006@N07/
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as max at maxengland.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list