[Spridgets] parts request

[pdxpete]

Oddly enough, I have sitting in front of me an "orphan" spindle that was in 
a box of assorted parts from the boot of  a Morris Minor I once bought.

I take it to be from a disc brake-equipped Spidget. I also take it to be a 
left spindle. But, don't take my word for it. (I am not usually quite these 
dense but, unfortunately, there's a pain killer-induced fog in my 
neighborhood at the moment.)

The part number on the spindle  is BTA 746 EN 16T.

Before anyone gets too excited please note that the very outer edge of the 
bearing surface is scored around its circumference. I do not know if that is 
the type of thing that could be taken care by using a Redi-Sleeve or not.

If anyone is interested in this spindle feel free to contact me off-list.

Pete



----- Original Message ----- 
From: "Robert Duquette" <robertduquette at sympatico.ca>
To: "'Spridgets'" <spridgets at autox.team.net>
Sent: Sunday, May 25, 2008 8:52 AM
Subject: Re: [Spridgets] parts request


> Duh!
>
> His email address is: npratt at nexicom.net
>
>
> -----Original Message-----
> From: Robert Duquette
>
> I've been contacted by a racer who had a spindle break and he hit the tire
> wall at Mosport hard enough.
>
> His name is Nick; is located around Mosport ( Toronto, I think ); and is
> looking for
>
>>> some kingpin assemblies, spindles and hubs
>>> Even just the RF.
>
> I believe that he has a line on hood, front fenders and the front cowl
> assembly, but would appreciate to hear what you have if you have some of
> these to offer.  My understanding is that he's looking for something ready
> to use.
>
> Robert D.
> NFI
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as pdx.pete at verizon.net
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets