[Spridgets] Fw: Re: Engine removal list suggestions..

Ed Lindley lindlaw at yahoo.com
Fri May 23 21:20:40 MDT 2008


--- On Fri, 5/23/08, Ed Lindley <lindlaw at yahoo.com> wrote:

> From: Ed Lindley <lindlaw at yahoo.com>
> Subject: Re: [Spridgets] Engine removal list suggestions..
> To: "Marc" <smarc at smarc.net>
> Date: Friday, May 23, 2008, 8:18 PM
> "this same reference wants you to was the parts in
> petrol" You sure about that. I don't recall my
> Factory Manual [a green 4(?) ring binder] ever saying that.
> Ed in SD 
> 
> 
> --- On Fri, 5/23/08, Marc <smarc at smarc.net> wrote:
> 
> > From: Marc <smarc at smarc.net>
> > Subject: Re: [Spridgets] Engine removal list
> suggestions..
> > To: "David Lieb"
> <dbl at chicagolandmgclub.com>
> > Cc: "Spridgets"
> <spridgets at autox.team.net>
> > Date: Friday, May 23, 2008, 10:24 AM
> > I get what you're saying; just was pointing out
> that I
> > got that info
> > from RTFM! I appreciate the correction. Somehow, the
> > most learning is
> > instigated by the biggest screw-ups.
> > Disclaimer: I'm not a mechanic, and I don't
> > play one on T.V. Your
> > mileage may vary. Consult a physician first. May be
> > subject to local
> > regulations. Look both ways...
> > Marc
> > 
> > True, it won't hurt and it will make it faster
> finding
> > which set of holes
> > line up.
> > Bear in mind that this same reference wants you to was
> the
> > parts in petrol
> > and to use a screwdriver to get the snout back into
> the
> > transmission, so
> > take
> > it with a grain or two of salt.
> > David Lieb 
> > 
> > I would have no problem deferring to the expertise
> here on
> > the list, the
> > reason I mentioned this was that I was reading through
> the
> > shop manual to
> > become familiar with the project prior to diving in
> (which
> > prompted me to
> > start the checklist in the first place), and it says
> to
> > "Mark the flange"
> > in section G.2 
> > http://www.smarc.net/MG/techinfo/midget/Section-G.pdf
> > 
> > IMHO, can't hurt... I don't have any paint
> markers,
> > but I find that a
> > bottle of White-Out works good. Also good for making
> timing
> > marks easily
> > visable.
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> > 
> > You are subscribed as lindlaw at yahoo.com
> > 
> > http://www.team.net/archive
> > 
> > http://autox.team.net/mailman/listinfo/spridgets


More information about the Spridgets mailing list