[Spridgets] Trunk lid

[type79 at ix.netcom.com]

Mike,
Is that the car on ebay tht went for $3,000?

jay fishbein
wallingford, ct
http://home.ix.netcom.com/~type79/

-----Original Message-----
>From: Michael Rowe <mdrowe at optonline.net>
>Sent: Mar 10, 2008 3:49 PM
>To: Spridget Chat Group <spridgets at autox.team.net>
>Subject: Re: [Spridgets] Trunk lid
>
>See http://s252.photobucket.com/albums/hh6/mdrowe_photo/Trunk%20Lid/
>  Its hard to understand how the boot lid is bent from your description. If you could put a picture up somewhere it would help.
>
>  Cheers!!
>  Jim
>
>
>  On 3/9/08, Michael Rowe <mdrowe at optonline.net> wrote:
>    My trunk lid has been tweaked about 1/2 inch, apparently from pushing down on it with the stay locked.  I am not heavy enough to just support the edge and bend it down with my hands.  I would have to stand on it.   If I use two padded boards and a C-clamp, all the bending force will be on a single point.  Does anyone know whether or not this can be done (carefully) without kinking the lid?