[Spridgets] Sway Bar

Norm 2Bs twobees at sprynet.com
Tue Mar 4 20:22:33 MST 2008


Thanks, Kevin.
 
I appreciate your help.
 
Norm

-----Original Message-----
From: K. Valentine [mailto:kevin at valentinephoto.net] 
Sent: Tuesday, March 04, 2008 9:31 PM
To: twobees at sprynet.com
Subject: Re: [Spridgets] Sway Bar



On Mar 4, 2008, at 8:46 PM, Norm 2Bs wrote:



Anyone have a Spridget bar handy you can measure?


Norm,

Answers below;



The Turner's has the following dimensions:
Total spread of 30".


Spridget - 30"



Main straight of c. 24"


Straight section is closes to 23"




Each side arm is c. 4"


4" not including the flat portion where the link attaches.  


Bend from front to sides is approx. 62-degrees, leaving c. 28-degrees from
sides to mounting flange.


Very close.



Approx 5" front to back - front of middle section of bar to centerline of
hole in flange for link bolt.


Same



Your help will be appreciated.  Thank you.


You're welcome.

Kevin


More information about the Spridgets mailing list