[Spridgets] ByPass Hose

[Mike/Donna Carpenter]

You can simply use a piece of 1/2 inch diam. inner hole heater hose or fuel line.  Make it a tiny bit shorter than the space where it will be and kink it in the middle while putting it on.  You should not have to remove much of anything.

Mike C

-----Original Message-----
>From: James Lempe <oldtimealaskan at yahoo.com>
>Sent: Jun 25, 2008 6:36 AM
>To: Spridgets at autox.team.net
>Subject: [Spridgets] ByPass Hose
>
>I'm faced with the task or replacing a leaking water bypass hose on my BE.
>It's a small hose about 2" long that goes between the water pump and the front
>end on the head.  Has anyone done this?  Do I need to remove the water pump or
>is there some easy way to replace it?
> 
>Thanks for the help!
> 
>Jim in Homer Alaska
>
>---


________________________________________
PeoplePC Online
A better way to Internet
http://www.peoplepc.com