[Spridgets] Clutch hydraulic line
Brad Fornal
tequila.brad at gmail.com
Sat Jun 21 08:59:12 MDT 2008
I will disagree with you on this. Not because I know anything, but because
while I was going through the problem on the 68, Peter C and I talked. He
asked if I had the correct line, and told me it was VERY important the the
correct line was on the car.
Peter can elaborate why in more detail than I.
Brad
On Sat, Jun 21, 2008 at 9:38 AM, Bill L <pythias at pacifier.com> wrote:
> Hello guy,
>
> one would think that the size of the pipe between is irrelevant
> other than the amount of fluid it holds. you move a given amount
> of fluid with the stroke of the pedal, and it takes a given
> amount of fluid to move the slave cylinder. As long as there is
> enough IN the master sufficient to move the slave the given
> amount, the quantity in the pipe between should mean nothing.
>
> --
> Best regards,
> Bill mailto:pythias at pacifier.com
> '66 Sprite HAN8L49403
> * Naughtily, Tom said nothing.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as tequila.brad at gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
DON JULIO 1942
www.myspace.com/tequilabrad
More information about the Spridgets
mailing list