[Spridgets] Engine pull

[Jim Johnson]

Thanks to all who responded.  I'll try Frank's route first as I have a spare
3/8 drive breaker bar if it breaks.

Cheers!!
Jim

On 6/15/08, Frank Clarici <spritenut at comcast.net> wrote:
>
> Jim
>
> Try just the square end of a 3/8 drive ratchet. That usually works.
> The size is probably 7/16" square, so a 1/2" drive ratchet needs to be
> ground down a bit but a 3/8, although loose, works unless the PO torqued the
> hell out of it.
>
> --
> Frank Clarici
> Toms River, NJ
>
>


-- 
Cheers!!
Jim - 68 "Spridget" in Dodge City
Don't miss "50 Years of Spridgets" at Lake of the Ozarks, June 26-29,
2008!!
For info and registration... <http://www.Sprite-MidgetClub.org>