[Spridgets] Question re. Torque wrench with extension

[Hal Faulkner]

I believe that co-axial is the correct term here.
Pedantic Hal

-----Original Message-----
From: spridgets-bounces+hal=katemuir.com at autox.team.net
[mailto:spridgets-bounces+hal=katemuir.com at autox.team.net]On Behalf Of
Geoff Branch
Sent: Saturday, June 14, 2008 11:46 AM
To: dmg at bossig.com; spridgets at autox.team.net
Subject: Re: [Spridgets] Question re. Torque wrench with extension


That won't change the setting, as long as you can ensure that it stays 
straight up and down, ie parrellel with the bolt.