[Spridgets] Rebound Strap

[Duncan Sinclair]

Michael,

I had exactly the same thoughts so I ended up making spacers to go inside
the strap for the bolt to pass through. Standard hardware store stuff worked
well with a slight trim.

Thanks
Duncan

-----Original Message-----
From: spridgets-bounces+duncan=pondhop.com at autox.team.net
[mailto:spridgets-bounces+duncan=pondhop.com at autox.team.net] On Behalf Of
Michael Rowe
Sent: Tuesday, July 15, 2008 18:50
To: Spridget Chat Group
Subject: [Spridgets] Rebound Strap

I have one spacer tube with each rebound strap.  If I were designing this
attachment, there would be two - one inside the hole in the rubber strap and
one between the two supports for the bolt.  Am I missing some spacer tubes,
or do I have the design wrong?

Michael Rowe
'74 Midget
Long Island, NY
You are subscribed as duncan at pondhop.com

http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
No virus found in this incoming message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.4.10/1552 - Release Date: 7/14/2008
18:28