[Spridgets] Bugeye/Frogeye Club..... Webber 40 side draft - Question

[Robert E. Shlafer]

Vigil...

Vizard shows following for stock 1275 with "modified" head (not specific on
this) utilizing 40DCOE (intake manifold not specified):

Chokes                               35
Aux. Vents.                        4.5
Emulsion Tubes                F16
Main Jets                          145
Air Corr's.                         180
Idle Jets                            50F2
Pump Jets                        45

CapBob


-----Original Message-----
From: uniquelittlecars at yahoo.com
Sent: Sunday, July 6, 2008 7:57 PM
To: Vigil
Cc: Morris Motors, spridgets, Sprite, Midget/Sprite
Subject: Bugeye/Frogeye Club..... Webber 40 side draft - Question

o?=
o?=
Group,
o?=
Any one out there running a Weber 40 side draft carb.
I would like to find out what you are using in the set up. I am hoping to find
some one with a street motor. I am putting the manifold and carb on a what is
thought to be a stock 1275cco?=motor. To many owners before him to know for
sure. But it does not sound like it has a cam and the head looks stock. I know
there are several variables when setting up a Weber. I just need some setting
for reference points.o?=needles, jets and any thing else you feel would put me
in the righto?=directiono?=
o?=
Thanks again,
o?=
Vigil
So Calo?=
Vigilo?=




[Non-text portions of this message have been removed]