[Spridgets] Motor removal

[K. Valentine]

On Aug 21, 2008, at 4:29 PM, Matt Hagopian wrote:
>  Could I have a few instructions on removal of the engine? Does the
> tranny have to come out with it too?

Spridget Engine removal...

1.   Scribe around bonnet hinges
2.   remove bonnet
3.   disconnect and remove Battery
4.   disconnect ground strap
5.   drain coolant
6.   drain engine oil (optional)
7.   drain transmission oil
8.   remove oil filter
9.   disconnect drive shaft from rear
10. remove radiator
11. disconnect carburetors with manifold
12. disconnect exhaust manifold
13. remove gearshift lever
14. unbolt transmission mounts (2 inside and 2 under)
15. disconnect speedo and reverse light switch
16. disconnect clutch hydraulics (unbolt slave cyl)
17. remove rocker cover, connect lift chains
18. take up slack in chains
19. lift engine ~3/4"
20. disconnect driver side eng.mount bracket from rubber pad.
21. disconnect pass. side entire mount from chassis.
22. finesse engine out...